JS ACTUATORS
THE ACTUATOR SPECIALIST
The Enerdrive System
Power failure can be damaging to equipment, products, livestock and people, especially in tightly controlled environments.
The Enerdrive system incorporates super capacitors to store energy ready to move the actuator to its failsafe position in the event of a power failure.
AQ actuators
The AQ actuator can be used with the JS Actuators Globe Valve and can be retrofitted to other manufactures units, including: -
Cazzaniga
Controlli
Johnson Controls
Honeywell
Invensys
Siemens
Robertshaw
Tour & Anderson
Danfoss
General Specifications
Power Supply:
24VAC/30VDC
Power Consumption:
Peak at Start-up: 6VA to 20VA at 26VAC Depending upon the Model
Operating at Full Load: 6VA at 26VAC
Wire Size & Length:
0.8 mm2 Minimum, 7.6 m. Maximum per Actuated Valve
Electrical Connections:
15.9 mm & 22.2 mm Knock Outs, Screw Terminals
Control Signals:
Digital Motors (AQT):
2 Wire or 3 Wire 2 Position and/or 3 Wire or 4 Wire 3 Point Floating Depending upon the Model
Multi Signal (AQM):
ANALOG: A) 2-10VDC; or B) May be Externally Wired with a 500 Ohm Resistor
which is Supplied for 4-20mA, Zero & Span Adjustable
PULSE WIDTH MODULATION: Time Base of 0.1 - 5 Seconds/20mS Resolution or
0.1 - 25 Seconds/100mS Resolution Selected by Dip Switch Position
SWITCH 24VAC: Triac or Dry Contact, 40mA Max. Switching Current
SWITCH COMMON: NPN Transistor, SCR, Triac or Dry Contact 75mA Max. Switching Current
DIGITAL: 3 Wire 2 Position or 4 Wire 3 Point Floating
24VAC/30VDC
Power Consumption:
Peak at Start-up: 6VA to 20VA at 26VAC Depending upon the Model
Operating at Full Load: 6VA at 26VAC
Wire Size & Length:
0.8 mm2 Minimum, 7.6 m. Maximum per Actuated Valve
Electrical Connections:
15.9 mm & 22.2 mm Knock Outs, Screw Terminals
Control Signals:
Digital Motors (AQT):
2 Wire or 3 Wire 2 Position and/or 3 Wire or 4 Wire 3 Point Floating Depending upon the Model
Multi Signal (AQM):
ANALOG: A) 2-10VDC; or B) May be Externally Wired with a 500 Ohm Resistor
which is Supplied for 4-20mA, Zero & Span Adjustable
PULSE WIDTH MODULATION: Time Base of 0.1 - 5 Seconds/20mS Resolution or
0.1 - 25 Seconds/100mS Resolution Selected by Dip Switch Position
SWITCH 24VAC: Triac or Dry Contact, 40mA Max. Switching Current
SWITCH COMMON: NPN Transistor, SCR, Triac or Dry Contact 75mA Max. Switching Current
DIGITAL: 3 Wire 2 Position or 4 Wire 3 Point Floating
Force:
450 N at Rated Voltage
Direction & Running Time:
Reversible, 60 Seconds
Ambient Temperature:
-18°C to +50°C
Feedback Potentiometer:
In Multi Signal (AQM): 4-20mA Output (May be wired for a 2-10VDC signal)
Fail Safe (Enerdrive) Rating:
Models Ending in 60 A: 450 N
Enerdrive Response Time:
0-450N: 60 Seconds for Full Stroke