BB models (5.6 Nm torque)

This compact quarter turn actuator may be directly coupled to either a 16 mm round or 10 mm square jack shaft or remotely mounted using an adaptor kit.

All motors are bi-directional under power and, in the case of models equipped with the Enerdrive System,
under failsafe conditions. The stroke may be limited to less than 90° mechanically. This model is available with or without the Enerdrive, failsafe system.

The BB models are available with programable, multi signal, analogue or on/off floating control.
 Applications
  • Small dampers

  • Unit ventilators

  • 1/4 turn valves

  • VAV box control

  • Fan coils
    •  General Specifications
    Power supply:
    24VAC/30VDC

    Power consumption:
    Peak at start-up: 6VA to 20VA at 26VAC depending upon the model.
    operating at full load: 6VA at 26VAC.

    Wire size & length:
    0.8 mm2 minimum, 7.6 m. maximum per actuator

    Electrical connections:
    15.9 mm & 22.2 mm knock outs, screw terminals

    Control signals:
    Digital motors (BBTS):
    2 wire or 3 wire 2 position and 3 wire or 4 wire 3 point floating depending upon the model
    Analogue (BBMS):
    A) 2-10VDC; or B) 4-20mA

    Torque:
    5.6 Nm at Rated Voltage

    Direction & time of rotation:
    Reversible, 90 Sec / 0-5.6 Nm











    Ambient Temperature:
    -18°C to +50°C

    Fail-safe (Enerdrive) rating:
    Models ending in 60, 80: 5.6 Nm

    Enerdrive response time:
    20-30 Seconds closure through 90°, 0-5.6 Nm

    Auxiliary switches:
    Models ending in 21 or 80: 2 mechanical, fixed at 10° & 80°

    Auxiliary switch rating:
    1 Amp resistive, 24VAC or 5 Amp resistive, 250VAC depending upon the model

    Electronic enclosure:
    UL recognized QMFZ2 fire rated 94V-0, IP42

    Geartrain enclosure:
    Die cast zinc with a steel base